1) Pipe Expansion Loop

It absorbs piping length differences occurring as result of temperature changes due to PPR linear thermal expansion. It prevents deformations and undesirable tensions in a distribution system.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B
16 pcs 10 1 0,07 1,60 232016 16 188,00 180,00 290,00
20 pcs 6 1 0,11 1,60 232020 20 210,00 200,00 300,00
25 pcs 5 1 0,21 3,20 232025 25 217,50 217,50 370,00
32 pcs 4 1 0,43 8,00 232032 32 231,00 231,00 400,00
40 pcs 2 1 0,67 8,00 232040 40 295,00 295,00 420,00

 

 

 

2) Cross Over

It allows for crossings of individual tracks of a water and heating distribution system. It is most often used for distribution systems in the floor or when avoiding vertical pipes.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B A2, C
16 pcs 180 1 0,03 0,24 233016 16   35,00 380,00 100,00
20 pcs 100 1 0,07 0,32 233020 20   42,00 400,00 110,00
25 pcs 50 1 0,09 0,64 233025 25   30,00 400,00 100,00
32 pcs 35 1 0,16 0,80 233032 32   35,00 400,00 90,00
40 pcs 20 1 0,33 1,60 233040 40   35,00 400,00 90,00

 

 

 

3) Cross Over with Socket Connections

It allows for crossings of individual tracks of a water and heating distribution system. It is most often used for distribution systems in the floor or when avoiding vertical pipes.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B A2, C
20 pcs 100 1 0,10 0,24 233120       200 20
25 pcs 50 1 0,12 0,32 233125       200 25

 

 

 

4) Elbow 90°

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that of the piping.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B
16 pcs 200 50 0,01 0,03 202016 16   13,30 22,00
20 pcs 300 50 0,02 0,07 202020 20   14,50 25,50
25 pcs 150 25 0,03 0,12 202025 25   16,00 29,50
32 pcs 80 10 0,06 0,24 202032 32   18,10 35,00
40 pcs 40 4 0,11 0,53 202040 40   20,50 41,50
50 pcs 30 2 0,19 0,96 202050 50   23,50 49,50
63 pcs 10 2 0,37 1,92 202063 63   27,40 60,00
75 pcs 6 1 0,52 3,20 202075 75   31,00 68,50
90 pcs 6 1 0,79 4,80 202090 90   35,50 79,00
110 pcs 3 1 1,38 5,50 202110 110   41,50 93,00
125 (PP-RCT) pcs 3 1 1,45 7,20 202125 125   40,00 124,00
160 (PP-RCT) pcs 1 1 2,21 9,00 202161 160      
200 (PP-RCT) pcs 1 1 2,96 20,00 202201 200      
250 (PP-RCT) pcs 1 1 3,42 30,00 202251 250      

 

 

 

5) Elbow 90° Reduced

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that of the piping.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B A2, C
25 x 20 pcs 100 10 0,03 0,12 211025020 25 20 16,00 29,50 14,50

 

 

 

6) Elbow 45°

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that of the piping.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B
16 pcs 200 50 0,01 0,04 203016 16   13,30 17,50
20 pcs 400 50 0,01 0,07 203020 20   14,50 19,50
25 pcs 200 50 0,03 0,12 203025 25   16,00 22,00
32 pcs 80 10 0,05 0,24 203032 32   18,10 25,50
40 pcs 30 10 0,09 0,53 203040 40   20,50 30,00
50 pcs 28 4 0,15 0,96 203050 50   23,50 35,00
63 pcs 10 2 0,30 1,92 203063 63   27,40 41,50
75 pcs 6 2 0,46 2,40 203075 75   30,00 48,00
90 pcs 6 1 0,73 3,20 203090 90   33,00 54,10
110 pcs 5 1 0,73 3,20 203110 110   37,00 62,10
125 (PP-RCT) pcs 1 5 1,03 3,20 203125 125      
160 (PP-RCT) pcs 1 1 1,95 7,00 203161 160      
200 (PP-RCT) pcs 1 1 2,54 18,00 203201 200      
250 (PP-RCT) pcs 1 1 3,09 25,00 203251 250      

 

 

 

7) Elbow 90° Female / Male

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that of the piping.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B B1 A2, C
20 pcs 400 50 0,01 0,05 204020 20 20 14,50 27,00 33,00 16,50
25 pcs 200 25 0,03 0,14 204025 25 25 16,00 32,00 38,00 18,00
32 pcs 100 20 0,07 0,22 204032 32 32 18,00 36,50 42,20 16,00

 

 

 

8) Elbow 45° Female / Male

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that the piping. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A A2, C
16 pcs 280 20 0,01 0,04 205016 16 16 13,30 15,00
20 pcs 200 20 0,02 0,07 205020 20 20 14,50 16,50

 

 

 

 

9) Elbow 90° Wall Mounted

A fitting that usually goes before the end of a distribution system. It fixates a wall-mounted distribution system before a termination welding fitting. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B A2, B1
20 pcs 60 10 0,02 0,16 206020 20   14,50   40,00
25 pcs 40 10 0,04 0,32 206025 25   16,00   51,00

 

 

 

10) Elbow 45° Female / Male

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that the piping. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B
20 pcs 50 10 0,03 0,13 242020 20   14,50 26,80
25 pcs 50 10 0,04 0,17 242025 25   16,00 29,50
32 pcs 20 5 0,06 0,20 242032 32   18,00 35,00

 

 

 

11) Reducer Internal / External

Reduced interconnection of individual pipes of a water or heating distribution system, having reduced pressure loss. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 D2 A B A2, B1
20 × 16 pcs 400 50 0,01 0,02 210020016 20 16 13,30   29,30
25 × 16 pcs 300 50 0,01 0,03 210025016 25 16 13,30   31,80
25 × 20 pcs 400 50 0,01 0,05 210025020 25 20 14,50   33,00
32 × 20 pcs 300 30 0,03 0,13 210032020 32 20 14,50   37,00
32 × 25 pcs 200 25 0,03 0,12 210032025 32 25 16,00   38,50
40 × 20 pcs 180 10 0,02 0,13 210040020 40 20 14,50   41,50
40 × 25 pcs 180 30 0,03 0,16 210040025 40 25 16,00   43,00
40 × 32 pcs 150 25 0,04 0,24 210040032 40 32 18,10   45,10
50 × 32 pcs 80 10 0,05 0,27 210050032 50 32 18,10   50,60
50 × 40 pcs 60 6 0,05 0,30 210050040 50 40 20,50   53,00
63 × 32 pcs 60 10 0,07 0,32 210063032 63 32 18,10   44,00
63 × 40 pcs 50 10 0,08 0,40 210063040 63 40 20,50   60,00
63 × 50 pcs 40 10 0,12 0,60 210063050 63 50 23,50   63,00
75 × 40 pcd 20 10 0,12 0,60 210075040 75 40 20,50   64,50
75 × 50 pcs 20 2 0,12 0,80 210075050 75 50 23,50   57,50
75 × 63 pcs 24 2 0,21 1,37 210075063 75 63 27,40   70,90
90 × 63 pcs 25 1 0,24 0,98 210090063 90 63 27,40   77,90
90 × 75 pcs 20 1 0,27 2,40 210090075 90 75 31,00   80,50
110 × 75 pcs 1 1 0,30 1,32 210110075 110 75 30,00   64,00
110 × 90 pcs 9 1 0,50 2,80 210110090 110 90 35,50   92,50
125x110 (PP-RCT) pcs 9 1 0,51 2,00 210125110 125 110      
160X110 (PP-RCT) pcs 1 1 1,14 5,00 210160111 160 110      
160X125 (PP-RCT) pcs 1 1 1,16 5,00 210160126 160 125      
200X160 (PP-RCT) pcs 1 1 2,61 9,00 210200161 200 160      
250X160 (PP-RCT) pcs 1 1 3,95 14,00 210250161 250 160      
250X200 (PP-RCT) pcs 1 1 4,45 15,00 210250201 250 200      

 

 

 

12) Coupling / Socket

Easy interconnection of individual pipes of a water or heating distribution system, having reduced pressure loss. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1, D3 A B
16 pcs 300 50 0,01 0,03 201016 16 13,30 27,00
20 pcs 400 50 0,01 0,05 201020 20 14,50 32,00
25 pcs 200 25 0,03 0,10 201025 25 16,00 35,00
32 pcs 100 10 0,04 0,19 201032 32 18,10 39,00
40 pcs 100 10 0,06 0,24 201040 40 20,50 44,00
50 pcs 40 4 0,11 0,60 201050 50 23,50 50,00
63 pcs 30 2 0,19 0,87 201063 63 27,40 58,00
75 pcs 15 1 0,27 1,92 201075 75 31,00 64,00
90 pcs 10 1 0,42 2,40 201090 90 35,50 71,00
110 pcs 4 1 0,67 2,80 201110 110 41,50 79,00
125 (PP-RCT) pcs 4 1 0,72 2,95 201125 125 40,00 90,00

 

 

 

13) Reducer

Reduced interconnection of individual pipes of a water or heating distribution system, having reduced pressure loss.  

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874 

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1, D3 D2 A A1, C A2 B
20 x 16 pcs 200 50 0,01 0,05 209020016 20 16   14,50 13,30 33,00
25 x 20 pcs 300 50 0,02 0,11 209025020 25 20   16,00 14,50 38,00
32 x 20 pcs 180 10 0,02 0,13 209032020 32 20   18,10 14,50 38,00
32 x 25 pcs 150 10 0,03 0,13 209032025 32 25   18,10 16,00 38,00
40 x 32 pcs order equivalent reduction external/internal 63 x 32
50 x 40 pcs 40 4 0,09 0,60 209050040 50 40   23,50 20,50 47,00
63 x 50 pcs 24 2 0,17 0,80 209063050 63 50   27,40 23,50 54,00

 

 

 

14) Bow

A simple, reliable fitting used to change the direction of a distribution system. When installed properly, it increases the pressure loss in the distribution system noticeably less than elbows in other distribution systems, thanks to the full-size inside diameter corresponding to that of the piping.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1, D3 D2 A A1, C A2 B
20 pcs 100 10 0,03 0,12 241020 20   14,50 13,00   56,00

 

 

 

15) T-Junction

A fitting allowing for the branching of a distribution system. The inside diameter of the fitting is not reduced compared to the inside diameter of the piping, and, therefore, the fitting does not significantly increase the pressure loss in the distribution system.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1, D3 A, A1, A3 A2 B C
16 pcs 150 50 0,02 0,08 208016 16 13,30   44,00 22,00
20 pcs 160 20 0,03 0,12 208020 20 14,50   51,00 25,50
25 pcs 120 20 0,04 0,24 208025 25 16,00   59,00 29,50
32 pcs 60 10 0,08 0,40 208032 32 18,10   70,00 35,00
40 pcs 48 4 0,13 0,96 208040 40 20,50   83,00 41,50
50 pcs 22 2 0,25 1,60 208050 50 23,50   99,00 49,50
63 pcs 9 1 0,46 2,74 208063 63 27,40   120,00 60,00
75 pcs 6 1 0,62 3,20 208075 75 31,00   137,00 68,50
90 pcs 5 1 0,99 4,80 208090 90 35,50   158,00 79,00
110 pcs 2 1 1,78 5,50 208110 110 41,50   186,00 97,00
125 (PP-RCT) pcs 1 1 1,15 4,32 208125 125 40,00   248,00 124,00
160 (PP-RCT) pcs 1 1 3,99 2,90 229161 160        
200 (PP-RCT) pcs 1 1 7,38 6,20 229201 200        
250 (PP-RCT) pcs 1 1 9,80 12,70 229251 250        

 

 

 

16) T-Junction, Reduced

A fitting allowing for the branching of a distribution system. The inside diameter of the fitting is not reduced compared to the inside diameter of the piping, and, therefore, the fitting does not significantly increase the pressure loss in the distribution system.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1, D3 D2 A, A1, A3 A2 B C
20 × 16 × 20 pcs 100 10 0,03 0,10 212020016 20 16 14,50 13,30 47,00 24,00
20 × 25 × 20 pcs 150 50 0,03 0,24 212020025 20 25 14,50 16,00 64,00 27,00
25 × 20 × 20 pcs 50 10 0,05 0,24 212025021 25/20* 20 16/14,5* 14,50 52,50 28,00
25 × 20 × 25 pcs 120 20 0,04 0,24 212025020 25 20 16,00 14,50 54,00 28,00
32 × 20 × 32 pcs 90 10 0,07 0,38 212032020 32 20 18,10 14,50 58,00 31,50
32 × 25 × 32 pcs 80 10 0,07 0,38 212032025 32 25 18,10 16,00 63,00 33,00
40 × 20 × 40 pcs 60 10 0,09 0,46 212040020 40 20 20,50 14,50 63,00 35,50
40 × 25 × 40 pcs 50 10 0,13 0,64 212040025 40 25 20,50 16,00 68,00 37,00
40 × 32 × 40 pcs 50 10 0,13 0,64 212040032 40 32 20,50 18,10 75,00 39,00
50 × 25 × 50 pcs 40 4 0,18 0,96 212050025 50 25 23,50 16,00 74,00 42,00
50 × 32 × 50 pcs 30 2 0,19 0,96 212050032 50 32 23,50 18,10 81,00 44,00
50 × 40 × 50 pcs 14 2 0,21 0,96 212050040 50 40 23,50 20,50 89,00 46,50
63 × 32 × 63 pcs 10 2 0,35 1,92 212063032 63 32 27,40 18,10 89,00 50,50
63 × 40 × 63 pcs 10 2 0,34 1,92 212063040 63 40 27,40 20,50 97,00 53,00
63 × 50 × 63 pcs 10 2 0,39 1,92 212063050 63 50 27,40 23,50 107,00 56,00
90 × 63 × 90 pcs 5 1 0,77 4,80 212090063 90 63 35,50 27,40 131,00 73,50
90 × 75 × 90 pcs 5 1 0,85 4,80 212090075 90 75 35,50 31,00 143,00 76,00

 125x75x125 pcs  5  1 0,95   5,30 212225075   125 75        
 125x90 x125 pcs  1,00  5,30  212125090   125 90        
 125x110x125 pcs  1,10  5,30  212125110  125 110        
160x90x160 (PP-RCT) pcs   1  3,20 9,00   212160091  160 90        
160x110x160 (PP-RCT) pcs  3,34  10,00  212160111   160 110        
200x90x200 (PP-RCT) pcs  6,20  4,00  212200091   200 90        
200x110x200 (PP-RCT) pcs  6,40  15,00  212200111   200 110        
200x125x200 (PP-RCT) pcs  6,80  16,00  212200126   200 125        
200x160x200 (PP-RCT) pcs  1 7,12  17,00  212200161   200  160        

 

  

 

17) Cross Piece

A fitting allowing for the branching of a distribution system. The inside diameter of the fitting is not reduced compared to the inside diameter of the piping, and, therefore, the fitting does not significantly increase the pressure loss in the distribution system.

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 G A  
20 pcs 100 10 0,03 0,16 235020 20   14,50  
25 pcs 100 10 0,04 0,24 235025 25   16,00  
32 pcs 50 10 0,06 0,32 235032 32   18,00

 

 

 

18) Reducer, Male Thread

A fitting allowing for the connecting of a distribution system. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 G A B
20 × 1/2” pcs 300 20 0,01 0,03 213020 20 1/2” 14,50 32,00
20 × 3/4” pcs 100 20 0,02 0,04 213021 20 3/4” 14,50 44,00
25 × 3/4” pcs 100 20 0,02 0,05 213025 25 3/4” 16,00 45,00
32 × 1” pcs 100 10 0,03 0,10 213032 32 1” 18,10 54,00
40 × 5/4” pcs 60 10 0,07 0,20 213040 40 5/4” 20,50 57,50
50 × 6/4” pcs 40 10 0,12 0,35 213050 50 6/4” 23,50 65,00
63 × 2” pcs 20 2 0,22 0,50 213063 63 2” 27,40 75,00

 

 

 

19) Elbow Connection, Male Thread

An economic end of a water distribution system in the form of a welding fitting.  

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D, D1 G A B
20 × 3/4” pcs 150 10 0,02 0,08 207020 20 3/4” 14,50  
25 × 1” pcs 100 10 0,03 0,10 207025 25 1” 16,00  

 

 

 

20) Elbow Connection, Male Thread

A permanent or temporary end of a branch of a water or heating distribution system. Fully corresponding to the pressure range.  

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D D1, G A B
16 pcs 500 50 0,01 0,02 229016 16   13,30 18,50
20 pcs 300 20 0,01 0,04 229020 20   14,50 21,00
25 pcs 200 20 0,01 0,05 229025 25   16,00 26,00
32 pcs 120 10 0,03 0,12 229032 32   18,10 31,00
40 pcs 60 10 0,05 0,24 229040 40   20,50 32,50
50 pcs 60 4 0,09 0,30 229050 50   23,50 47,00
63 pcs 30 2 0,15 0,40 229063 63   27,40 51,00
75 pcs 5 1 0,26 0,50 229075 75   30,00 60,00
90 pcs 1 1 0,42 0,60 229090 90   33,00 69,00
110 pcs 1 1 0,53 0,70 229110 110   37,00 79,00
125 (PP-RCT) pcs 1 1 0,62 0,85 229125 125      
160 (PP-RCT) pcs 1 1 3,99 12,00 208161 160   100 140
200 (PP-RCT) pcs 1 1 7,38 18,00 208201 200   145 190
250 (PP-RCT) pcs 1 1 9,80 23,00 208250 250   263 218

 

 

 

21) End Cap, Female

A permanent or temporary end of a branch of a water or heating distribution system. Fully corresponding to the pressure range.  

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D D1, G A B B1 C, G
20 pcs 150 30 0,01 0,04 229021 20 20   23,50   14,50
25 pcs 200 50 0,01 0,06 229026 25 25   29,00   16,00

 

 

 

22) Saddle

A fitting allowing for the branching of a larger-dimension distribution system and additional insertion of a branch. The inside diameter of the fitting is not reduced compared to the piping, and, therefore, the fitting does not significantly increase the pressure loss in the distribution system. 

Available both in Gray and Green colors.

Standards: DIN 8077, DIN 8078, EN ISO 15874

 

Size Unit Box Bag Kg cbm Art. Nr. D D1, G A B B1
63 × 32 pcs 120 10 0,03 0,17 238063032 63 32 18,00 58,50 27,00
75 × 32 pcs 120 10 0,03 0,17 238075032 75 32 18,00 64,50 27,00
90 × 32 pcs 120 10 0,03 0,17 238090032 90 32 18,00 72,00 27,00
110 × 32 pcs 120 10 0,03 0,17 238110032 110 32 18,00 80,70 25,70

 

>Home<  >About Us<  >Products (PPR Pipes // PERT Hot Pipes // PEXc Hot Pipes // PEXc Pipes // PERT-AL Pipes // PEXc-AL Pipes // HDPE Pipes // PPR Fittings // PPR Threaded Fittings // PPR Valves // Accessories // Welding Tools)<  >Library<  >Contact<